Labels

How to configure Cable dialer on cisco 871 router


1.
pseudowire-class CABLE
  encapsulation l2tpv2

2.
interface FastEthernet4
 ip address dhcp client-id FastEthernet4
 duplex auto
 speed auto
3.
interface Virtual-PPP1
 description Cabler_Dialer
 ip address negotiated
 ip nat outside
 ip virtual-reassembly
 load-interval 30
 no cdp enable
 ppp pap sent-username username password 12346
 pseudowire <l2tp server IP> 2 pw-class CABLE

4.
ip route 0.0.0.0 0.0.0.0 Virtual-PPP1
ip route <l2tp server IP> 255.255.255.255 FastEthernet4

6 comments:

  1. just what i was searching for.

    www.n8fan.net

    ReplyDelete
  2. There are certain point in our life that we encounter failure but it doesn't mean you will lose hope and give up everything but it only means that every failure there's an exchange and that is new beginning. Well, thank you for sharing your article and keep on posting. Visit my site too for more information.

    triciajoy.com

    www.triciajoy.com

    ReplyDelete

  3. I will keep your new article. I really enjoyed reading this post, thanks for sharing.

    Sol
    www.gofastek.com

    ReplyDelete
  4. Love it! Very interesting topics, I hope the incoming comments and suggestion are equally positive. Thank you for sharing this information that is actually helpful.


    ufgop.org
    ufgop.org

    ReplyDelete
  5. I really enjoyed reading your article. I found this as an informative and interesting post, so i think it is very useful and knowledgeable. I would like to thank you for the effort you have made in writing this article.


    edupdf.org

    ReplyDelete